|
|
Business, Engineering - MITCalc - Tolerance analysis 1.13 By MITCalc
|
|
|
Business:Engineering Shareware
Views:2423(+1)
By MITCalc
Two programs for the tolerance analysis of linear, 2D and 3D dimensional chains
1) Tolerance analysis of linear dimensional chains.
The program is designed for tolerance analysis of linear (1D) dimensional chains. The program solves the following
problems:
- Tolerance analysis, synthesis and optimization of a dimensional chain using the arithmetic "WC" (Worst case)
method, possibly the statistical "RSS" (Root Sum Squares) method.
- Analysis of a dimensional chain deformed as a result of temperature change.
- Extended statistic analysis of dimensional chain using the "6 Sigma" method.
- Tolerance analysis of a dimensional chain during selective assembly including optimization of the number of
assembled products.
All solved tasks enable work with standardized tolerance values, both in designing and in optimization of the
dimensional chain.
2) Tolerance analysis of 2-D and 3-D dimensional chains
The program is designed for the tolerance analysis of two-dimensional (2-D) and three-dimensional (3-D) dimensional
chains. The program solves the following problems:
- Tolerance analysis of a dimensional chain using the "Worst case" method.
- Tolerance analysis of a dimensional chain using the "Monte Carlo" method.
In designing a dimensional chain, the program enables work with standardized tolerance values.
Data, methods, algorithms and information from professional literature and ANSI, ISO, DIN and other standards are
used in calculation. List of standards: ANSI B4.1, ISO 286, ISO 2768, DIN 7186.Application is developed in MS
Excel, is multi-language and supports Imperial and Metric units.
This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives,
bearings, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
|
| Company | MITCalc |
| Website | http://www.mitcalc.com |
| Country | Czech Republic |
| Email | support@mitcalc.com |
| Os | Win95, Win98, WinME, WinNT 3.x, WinNT 4.x, Windows2000, WinXP, WinME, Windows Vista Starter, Windows Vista Home Basic, Windows Vista Home Premium, Windows Vista Business, Windows Vista Enterprise, Windows Vista Ultimate, Windows Vista Home Basic x64, Windows Vista Home Premium x64, Windows Vista Business x64, Windows Vista Enterprise x64, Windows Vista Ultimate x64 |
| Requirements | Microsoft Excel (97, 2000, XP...) |
| Language | English, German, French, Spanish, Italian, Chinese Simplified, Chinese Traditional, Czech, Portuguese |
| Release Date | 22 05 2007 |
| License | Shareware |
| Limitations | |
|
Other Programs By MITCalc
MITCalc - Plates 1.11
|
This calculation deals with the deflection, stress and variation of forces in the loaded flat plates. The calculation is designed for plates that are flat, homogeneous, with the same thickness and made from one material.
Graphics:Misc Shareware
Views:853(+9)
|
|
MITCalc - Tension Springs 1.15
|
Geometric and strength designs of helical tension cylindrical springs loaded with static loading. Application supports
Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems.
Business:Engineering Shareware
Views:1570(+2)
|
|
MITCalc - Profiles Calculation 1.14
|
The calculation solves area characteristics of profiles and mass characteristics of solids created by extrusion or
rotation of the profile. Application is developed in MS Excel, is multi-language and supports Imperial and Metric
units.
Business:Engineering Shareware
Views:1441(+2)
|
|
MITCalc - Timing Belts Calculation 1.14
|
Geometric design and strength check of toothed belt transmissions. Application contain a database of timing belts,
supports Imperial and Metric units, is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and
3D CAD systems.
Graphics:Cad Shareware
Views:1688(+3) Rating:5.0
|
|
MITCalc3D for Autodesk Inventor 1.40
|
This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and
many others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international standards
(ANSI, ISO, DIN….).
Business:Engineering Shareware
Views:1571(+2)
|
|
MITCalc - Rolling Bearings Calculatio... 1.13
|
Selection, calculation and check of rolling bearings (inch versions). Application supports Imperial and Metric units,
is based on SKF, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems
Business:Engineering Shareware
Views:1624(+4)
|
|
MITCalc - Welded connections 1.10
|
The calculation is intended for the geometrical design and strength control of statically loaded welded connections. Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems
Business:Engineering Shareware
Views:1458(+1) Rating:5.0
|
|
MITCalc - Beam Calculation 1.14
|
Calculations of the straight beams with constant cross section.
Business:Engineering Shareware
Views:1386(+3) Rating:5.0
|
|
MITCalc 1.40
|
|
This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and
many
others. MITCalc support 2D (and 3D) CAD systems, Imperial and Metric units and many international standards
(ANSI, ISO, DIN….).
Graphics:Cad Shareware
Views:1384(+3)
|
|
MITCalc - Rolling Bearings Calculation I 1.14
|
|
Selection, calculation and check of rolling bearings of the company SKF. Application supports Imperial and Metric
units, is based on SKF, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems
Business:Engineering Shareware
Views:1405(+0) Rating:7.0
|
|
MITCalc - Bevel Gear Calculation 1.13
|
Geometric design and strength check of bevel gear with straight and helical toothing. Application supports Imperial
and Metric units, is based on ANSI / AGMA and ISO / DIN standards and support many 2D and 3D CAD systems
Graphics:Cad Shareware
Views:1399(+0)
|
|
MITCalc3D for Solid Edge 1.40
|
|
Mechanical, Industrial and Technical Calculations for Solid Edge
Graphics:Cad Shareware
Views:1245(+1)
|
|
MITCalc - Planet Gear Calculation 1.10
|
Geometric design and strength check of planet gear with straight and helical toothing. Application supports Imperialand Metric units, is based on ANSI / AGMA and ISO / DIN standards and support many 2D and 3D CAD systems
Graphics:Cad Shareware
Views:683(+0)
|
|
MITCalc - Shaft connection 1.15
|
Geometric designs and strength checks of shaped connections of shafts with hubs (keys, splines). Application
supports Imperial and Metric units, is based on ANSI, ISO, DIN BS, JIS standards and support many 2D CAD
systems
Business:Engineering Shareware
Views:2010(+4)
|
|
MITCalc - Spur Gear Calculation 1.15
|
Geometric design and strength check of spur gear with straight and helical toothing. Application supports Imperial
and Metric units, is based on ANSI / AGMA and ISO / DIN standards and support many 2D and 3D CAD systems
Graphics:Cad Shareware
Views:1702(+3)
|
|
MITCalc - Tolerances 1.14
|
Calculation includes tables and calculations for easy option of fits of machine parts and determination of their
dimensional tolerances and deviations. Application is developed in MS Excel, is multi-language and supports
Imperial and Metric units.
Business:Engineering Shareware
Views:1766(+3)
|
|
MITCalc - V-Belts Calculation 1.15
|
Geometric design and strength check of belt transmissions using V-belts. Application contain a database of belts,
supports Imperial and Metric units, is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and
3D CAD systems.
Graphics:Cad Shareware
Views:1669(+3)
|
|
MITCalc - Compression Springs 1.15
|
Geometric and strength designs of helical compression cylindrical springs loaded with static or fatigue loading.
Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D
CAD systems.
Business:Engineering Shareware
Views:1740(+2)
|
|
MITCalc - Force shaft connection 1.14
|
Geometric designs and strength checks of force couplings of shafts with hubs (Interference fit, clamping
connection). Application supports Imperial and Metric units and is based on ANSI, ISO, DIN BS, JIS standards.
Business:Engineering Shareware
Views:1366(+0)
|
|
MITCalc - Roller Chains Calculation 1.14
|
Geometrical design and strength check of common chain transmissions using roller chains.The application works
with many 2D and 3D CAD systems and includes corresponding databases of roller chains from ANSI / ASME, ACA,
ISO, DIN, BS and JIS.
Business:Engineering Shareware
Views:1736(+2)
|
|
There is no crack, serial number, keygen for MITCalc - Tolerance analysis 1.13
On this page you never found:
nor crack MITCalc - Tolerance analysis 1.13,
nor serial MITCalc - Tolerance analysis 1.13,
nor serial number, MITCalc - Tolerance analysis 1.13,
nor keygen MITCalc - Tolerance analysis 1.13,
nor key MITCalc - Tolerance analysis 1.13.
nor registration code for MITCalc - Tolerance analysis 1.13.
Using cracks, key generators, illegal serial numbers and registration codes prevents developing new software.
|
|
